How to Root Galaxy S4 I9500 on Android 4 2 2 XWUBMG5 Jelly Bean Firmware

The Exynos 5 octa-core variant of Samsung Galaxy S4 (GT-I9500) has received a new software update with firmware build number I9500XWUBMG5. The new software update is still based on Android 4.2.2 Jelly Bean version and now available in India, Nepal, Sri Lanka, and Bangladesh.

Samsung Galaxy S4 I9500 users who have already updated their devices with Android 4.2.2 XWUBMG5 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9500. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9500 (CF-Auto-Root-ja3g-ja3gxx-gti9500.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9500 Running on Android 4.2.2 XWUBMG5 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 running on Android 4.2.2 XWUBMG5 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

GMD GestureControl ★ root apk Download

GMD GestureControl ★ root apk

Current Version : 6.3.1

Requires Android : 3.1 and up

Category : Tools

Size : 1.8M

Original Post From http://apkandroiddownloads.blogspot.com

GMD GestureControl ★ root apk Description

Control device with MULTITOUCH and MULTITASK gestures similar to iPad. Works in all applications. You can even hide status bar and enjoy full screen in your favorite games or while browsing.

"For those who tend to get tired of Android's status bar, or just want more intuitive gesture-based controls on their tablet, this app is definitely worth a shot." - Android Police

★ Try Lite version before you buy
★ Requires root access

★ Multitouch
★ Multitask - start any application, shortcut or custom action without leaving current application
★ Custom actions - LaunchPad, Start application, Previous Application, Next application, Home, Kill current application, Back, Forward, Recent application list, Recent application dialog, Menu, Notification Panel, Hide/Show status bar, Start launcher shorcut(bookmark, contacts, settings, etc), Start Tasker task, Pause gestures, Exit, Screen Off (lock), Alt+Tab, Music Play/Next/Previous, Volume, Search, Voice Search, Select Input Method.
★ Swipe 4 fingers right - open previous application
★ Swipe 4 fingers left - open next application
★ Expand 4 fingers - LaunchPad (similar to SwypePad, start any application, shortcut or custom action)
★ Pinch 4 fingers - Home gesture
★ Swipe 3 fingers down - Back gesture
★ Swipe 3 fingers up - Bottom recent applications bar
★ Swipe 4 fingers up - Hide/Show status bar (experimental)
★ Custom gestures - create your own gestures to start any application, shortcut or custom action

THERE IS NO WAY TO ANSWER MARKET COMMENTS OR CONTACT COMMENTATOR - EMAIL ME IF YOU WANT ANSWER.
Please don't post your problems in market, email me or go post to XDA, thanks:
http://forum.xda-developers.com/showthread.php?t=1535740

If your device is listed as unsupported, please read FAQ in Help tab. If it still do not work, contact me by email: goodMoodDroid@gmail.com

Description: This application allows you to control tablet with gestures.
Swipe 4 fingers up to hide status bar. Do same gesture again to restore bar.
Swipe 4 fingers right to open previous application.
Swipe 4 fingers left to open next application.
Pinch with 4 fingers anywhere on screen to return to home screen from any application.
Swipe 3 fingers down to execute back action in any application.
Swipe 3 fingers up to show custom bottom bar with recent applications.
Expand 4 fingers anywhere on screen to open LaunchPad dialog. It is similar to SwypePad and allows start your most often used applications, shortcuts or custom actions anywhere anytime with simple gesture.
Works in all applications, games and browsers.
Application will use freed space when you hide status bar. Some games even work better with status bar hidden.
There is an option to switch to single touch gestures if its more convenient. You can even create your own gestures for any action.

Full version adds following features: option to hide notification icon, custom gestures and special actions, any number of actions in LaunchPad.

Tags: Hide bar, gesture, gestures, gesture control, gesturecontrol, status bar, system bar, full screen, Honeybar, ICS, SwypePad, iPad, GMD, G.M.D.

GMD GestureControl ★ root apk Videos and Images

Visit us on http://apkandroiddownloads.blogspot.com

download

Read More..

How to Root Galaxy S3 I9300 on Android 4 3 Jelly Bean Firmware

The International version of Samsung Galaxy S3 with model number GT-I9300 has received Android 4.3 Jelly Bean update firmware. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S3 I9300 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on the international version of Samsung Galaxy S3 (GT-I9300). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S3 I9300 (CF-Auto-Root-m0-m0xx-gti9300.zip)
2. Odin 3.07

Steps to Root Galaxy S3 I9300 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-m0-m0xx-gti9300.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S3 I9300 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Font Installer Root v1 0 Download APK

Description This app allows you to choose between hundreds of fonts to apply to your whole device. You must be rooted with busybox installed. If you do not know what "root" is please dont download this app or rate poorly. Features include: - Hundreds of fonts to install with previews - Download/load fonts in background - Preview fonts page w/ swipe gestures to switch between previews - Install any font from your SD card - Backup/Restore system fonts - Choose which system fonts to override - Set the install & download path - Hot reboot (fast reboot) Donate Users (get license for 99 cents): - Select font favorites - Remove ads

Read More..

root Triangle Away apk Fast Download

[root] Triangle Away apk

Current Version : 2.90

Requires Android : 2.3.3 and up

Category : Tools

Size : 267k

Original Post From http://apktoolsdownload.blogspot.com

[root] Triangle Away apk Description

Many Samsung devices store a flash counter that keeps track of how many times you have flashed *custom* firmwares to your device. On some devices, a yellow triangle or other sort of visual warning is also displayed during boot if you are running a *custom* firmware. TriangleAway was built to disable the triangle (if a visual warning is present) and reset the custom ROM flash counter to 0. This app requires root !

You can find out the current status of your flash counter and firmware state (custom or official) by booting into "download mode" on most devices. The usual way of getting into "download mode" is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the "adb reboot download" command also often works.

When you run TriangleAway, if your device and firmware are supported, it will show you the detected state of the binary (custom or official) and flash counter value, and the option to "Reset flash counter". Please confirm that the information shown is correct before resetting the values.

On a number of devices, TriangleAway can work, but your firmware may not be supported directly. In that case, the app will tell you it needs to reboot into a special boot mode, which will be happen if you select "Reset flash counter". The device will reboot into a special mode which will allow you to review the current status and reset the binary and flash counter values (or abort and do nothing). On some devices this will actually trigger the counter to 1 if its 0 - so if you're "just checking", do that in download mode!

!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!
( and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you *really* mean it! )

Note#1: using Triangle Away may unmount your SD card. Reboot or manually remount it from Android settings.

Note#2: on new devices like the SGS3/SGNote2/SGNote10.1, status can only be reset on some firmwares - they must be stock firmwares!

Supported devices:

Samsung Galaxy S2:
- GT-I9100 **
- Sprint Epic 4G Touch **
- Korea SHW-M250K/L/S **

Samsung Galaxy Note:
- GT-N7000 **
- GT-I9220 **

Samsung Galaxy S3:
- GT-I9300/I9300T **
- USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
- Canada
- GT-I9305/I9305T/I9305N LTE **
- Korea SHV-E210K/L/S **
- Korea SHW-M440S **

Samsung Galaxy Note 2:
- GT-N7100/N7100T/N7102/N7105/N7105T **
- SPH-L900 Sprint **
- SGH-T889 T-Mobile **
- SGH-T889V Canada **
- SGH-R950 US Cellular **
- SGH-I317/M AT&T/Canada **
- SCH-I605 Verizon ** (unlock bootloader !)
- Korea SHV-E250K/L/S **

Samsung Galaxy Camera EK-GC100 **

Samsung Galaxy Note 10.1":
- GT-N8000 3G **
- GT-N801x Wi-Fi **
- GT-N8020 LTE **
- SHW-M480S/K/W **

Samsung Galaxy Tab 2:
- GT-P310x 7" 3G
- GT-P311x 7" Wi-Fi
- GT-P510x 10.1" 3G
- GT-P511x 10.1" Wi-Fi

Various:
- I8160, I8190
- I9070/P
- I9082
- I9260
- S7500, S7560, S7562

** Various models are supported depending on firmware, but only the exact models listed are supported regardless of firmware version.

Whether or not Triangle Away works may depend on your kernel, try flashing a different one if it doesn't work.

Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode.

For discussion and technical details, see the XDA-Developers.com thread here:

http://forum.xda-developers.com/showthread.php?t=1494114

Note that this download is also available from that thread completely for free. You can go there and download it for free, or buy me a beer and download it from Play. It is the same program.

I'm not sure about future updates - http://www.chainfire.eu/articles/118/Triangle_Away_vs_Samsung/

[root] Triangle Away apk Videos and Images

Visit us on http://apktoolsdownload.blogspot.com

download

Read More..

How to Root Galaxy S4 I9500 on Android 4 3 Jelly Bean Firmware

The Exynos 5 octa-core variant of Samsung Galaxy S4 (GT-I9500) has received a new Android 4.3 Jelly Bean firmware. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy S4 I9500 users who have already updated their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy S4 I9500. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9500 (CF-Auto-Root-ja3g-ja3gxx-gti9500.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9500 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Hack Tools MOD App For Android ROOT

HACK TOOLS: UPDATE: 8/9/2013

1. Game CIH v3.0.0 

ZippyShare: Here

Data File Host: Here

- Trick how to get full version: Turn net on first and open game cih ( After that just turn net off)

2. Game Killer v2.6.0 

ZippyShare:Here
Data File Host: Here

- Can hack almost everygame Game CIH cant hack. ( LITE Version)

3. Game Guardian v6.0.4 

ZippyShare:Here
Data File Host: Here

- Not as good as the 2 tools above but it useable

Instructions: ( I wrote every words so if u want to copy it please add credit or change it)

Ok now all tools above only help u with game that have number.

Like an RPG game when u play u have like 100 gold or coin. Now open TOOLS and search for it. Input 100 ( After that it will search for every number in the game that have figure 100).

Now go back to the game and play to raise the gold. Example: 130. Open hack and input 130. It will find less number than the search before. Find and change the right one.

NOTE: Not going to work in some game that have hack prevent like Inotia 4, Angry Birds, Zenonia 5 Official, etc

Also not going to work in some Online game because the game data is on their server not in ur phone. Like: Shadow Era Card Games, Order And Chaos Online, Spear Online, etc

MOD APP: UPDATE: 8/9/2013

1. Lucky Patcher v3.5.6

Data File Host: Here

Can Remove game license, google ads, etc

2. Mod Google Play

Download From: Here

Can Remove game license make them run without net 

3. FreeDom ( IAP)

Download From: Here

Buy Stuffs in game for FREE And Unlock From Lite Version to Full, Pro or Premium Version. ( FREE)

Read More..

Screenshot FREE Root Needed! apk Download

Screenshot FREE (Root Needed!) apk

Current Version : 1.1.2

Requires Android : 2.1 and up

Category : Tools

Size : 631k

Original Post From http://apktoolsdownload.blogspot.com

Screenshot FREE (Root Needed!) apk Description

Screenshot FREE is free permanently!

PLEASE MAKE SURE YOU ANDROID DEVICE IS ROOTED. WE DO NOT SUPPORT UNROOT DEVICES NOW.
If you have any question about this app, please feel free to submit a feedback instead of leaving a 1 star comment. We will TRY OUR BEST TO FIX IT.

It's a faster and smaller screenshot app and just take less than 0.1% of your phone memory.

If you want to use this app on your Android devices, please make sure your phone is ROOTed. What is root: http://en.wikipedia.org/wiki/Rooting_(Android_OS)

Android 4.0 supporting version is coming soon!
If you use Galaxy Nexus, HTC One X or other Ice Cream Sandwich (ICS) phone, DO NOT download it now.

Features:

- Take screen shot whenever you want by clicking the floating camera button;
- Screenshots you take are saved in your SD card (SDScreenshotFREE);
- Share screenshots via email, Facebook, twitter, SMS and so on;
- More cool features coming soon: picture viewer; image editor and so on;
- Feel free to give us your opinion about this app. Will try our best to make Screenshot FREE better!
- It's compatible with: Samsung Galaxy series, HTC Desire, HTC Evo, LG Optimus, Motorola Droid, Milestone, Huawei etc.

KW: screenshot,screen shot,screenshot ux,photo,pics,picture,snapshot,root,rooting,rooted

Screenshot FREE (Root Needed!) apk Videos and Images

Visit us on http://apktoolsdownload.blogspot.com

download

Read More..

Android Signal Booster ★ ROOT apk Update Version

Android Signal Booster ★ ROOT apk

Current Version : 3.0.11

Requires Android : 2.0.1 and up

Category : Tools

Size : 2.0M

Original Post From http://apktoolsdownload.blogspot.com

Android Signal Booster ★ ROOT apk Description

First "booster" to fully support Jelly Bean

★ - GSM/3G/4G/CDMA2000
★ - WiFi
★ - Bluetooth
★ - Improves battery life

After using this repair tool users have reported:

★ - Faster internet connections.
★ - Improved signal.
★ - Better call quality.
★ - 4G instead of 3G.
★ - Longer battery life

Boosters are fake

Why is it called Android Signal Booster then?
So users who are looking for a booster can learn the truth and install an app that does not contain ad-ware.

Why root?
In the release of Jelly Bean, Google closed the vulnerability booster apps use to toggle flightmode. Thankfully there is still one for devices with root access.

(root is ONLY required if your device is running 4.2 or greater. Otherwise this app runs without the need for root access. Check root access here! )

Upgrade
Using in application billing you can become a pro user and get the following benefits.

★ - Auto Repair
★ - One Click Widget - Quick background repairs!
★ - NO ADVERTS WHAT SO EVER!
★ - Feature requests.
★ - Personal support.
★ - All future updates.

With over 25 years experience in the mobile network industry, I bring to you the truth about so called Network Signal Boosters on Google Play.

If you don't care about the truth and just want to "boost" your signal, download now and click the button. Otherwise, read on and learn the truth!

This application repairs your wireless networks in the same way as all the so called "Booster" applications. It stops all wireless networks and restarts them.

Usage

Simply press the large button of a spanner to repair your signal quality.

Donations

Purchase the pro upgrade. Or donations can be made by clicking the smaller $ button. Note Donations are completely free to the user and generate revenue for developer by displaying an advert.

Developers note

This application was developed to be transparent to user. It does not try hiding what its doing by going into full screen mode (removing the status bar). As mentioned before, there are other applications that do the same as this, but this is first and (at the time of writing) the only one that informs you that it resets your wireless networks in attempt to improve the service from them.

Truth

I develop software for mobile phones (the part that talks to the network) and I was shocked when I found network/signal "booster" apps. You CANNOT "boost" your signal, however you can repair your service levels if the low level software in your phone is misbehaving, giving you poor signal, in an otherwise good signal area. This application fix's the problem in the same way as all the other "booster" apps. The software shuts down all wireless networks and restarts them, that's it, nothing more.

Android Signal Booster ★ ROOT apk Videos and Images

Visit us on http://apktoolsdownload.blogspot.com

download

Read More..

SetCPU for Root Users apk Free

SetCPU for Root Users apk

Current Version : Varies with device

Requires Android : Varies with device

Category : Tools

Size : Varies with device

Original Post From http://apktoolsdownload.blogspot.com

SetCPU for Root Users apk Description

SetCPU is a tool for changing the CPU settings on a rooted Android phone or tablet, including the Galaxy Nexus, HTC One series, Nexus S, Nexus One, Motorola Droid, Samsung Galaxy series, and most other devices. You're under control: SetCPU can improve your performance, save battery, or both!

Automate SetCPU with profiles! SetCPU allows you to set up powerful profiles to change your settings under certain conditions, such as what app is running, when the phone is asleep or charging, when the battery level drops below a certain point, when the phone's temperature is too high, or during certain times of day. See the screenshots for examples of how you might set up profiles.

SetCPU's wide feature set make it useful to Android beginners and enthusiasts alike. Accelerate your processor to unleash your phone's true multitasking potential, or dial your CPU's speed down to save battery.

SetCPU also includes a "voltage control" menu, available to certain devices with custom kernels that support it, to control undervolting to save even more battery. Keep in mind that undervolting is only available for certain kernels.

Recent Changes:
Additional permission: Read logs is used for efficient app condition checking. That is currently all it's used for.

3.0.0:

Profiles tab
- Completely rewrote profiles.
- Older profiles will automatically be converted into new profiles.
- Added app and day of week in addition to the older conditions, and more are coming.
- Profiles now support combining conditions under logical trees, with nestable "and," "or," and "not" operators available. It is now possible to easily build complex profiles that take the place of multiple profiles in the older version.
- Actions can now be selected individually.
- Profiles can now be marked as "non-exclusive," which means they will not block profiles with lower priorities from evaluating. In this case, the profiles with lower priorities will perform only actions which have not been performed by profiles with higher priorities. SetCPU will keep evaluating profiles until it reaches an "exclusive" profile that evaluates as true.
- All number selectors in profiles are now in the style of the frequency selector in the main tab.
- The new file extension for exported profile settings is ".setcpu.json."
- To prevent ambiguous situations, it's no longer possible to select priorities that have been used by other profiles.
- The CPU temperature sensor on OMAP4 and some other devices should now be supported for profiles. The option will appear if available.
- Notifications are now set as an action per profile and can now be non-persistent.
- SetCPU will still use the main screen as a "default profile" to set if no other profiles are active. It is now possible to specify an alternate default profile by creating an exclusive profile with no conditions at priority 0.
- SetCPU now asks for a file name before backing up profiles to storage.
- It is now possible to share profiles without having the internal/external storage mounted.

Main tab
- IO scheduler selection has been added via a drop down menu in the main tab.

Bugfixes
- Fixed a bug where the short benchmark always reported 0 ms.
- Fixed the labels in the pie graph in system info.
- Fixed some common crashes.

Permissions:
Root: SetCPU needs root permissions to modify the CPU speed and other settings.

Start at boot: SetCPU will start a profiles service at boot, if enabled. It also sets default boot settings, if enabled. SetCPU does not run in the background if profiles are not enabled, and becomes inactive after settings, if any, are applied.

Wake lock: This prevents the phone from sleeping while stress testing and benchmarking.

Write external storage: SetCPU needs to read from and write to the SD card or internal storage to back up profiles.

Read phone state: The "in call" condition needs this to determine if the user is making a phone call or not, and trigger the profile if the user wants to.

SetCPU for Root Users apk Videos and Images

Visit us on http://apktoolsdownload.blogspot.com

download

Read More..